[مخالف - طلب حل : ]عندي مشروع في الاسمبلي ضروري إن شاء الله يكون في مزان حسناتكم

السلام عليكم

المشروع بالانجليزي اذا حد حاب الترجمه انا بترجم بس الرجاء الطلب

هذا المشروع المطلوب مني انا كمان مش عارف ابدء

شكرا

You need to successfully manipulate only three (the three to the right side) 7-Segment

LEDs.

 I will ask you for a sequence of numbers, you will then modify your code and when you

run it the sequence should light up

 After that step, PORT H will perform a mathematical operation; the answer will be

shown using the 7-Segment LEDs (the initial value must be set to zero)

 SW3: adds one and it will be displayed on the leftmost 7-segment LED (no change will happen to the other digits )

 SW4: adds one and it will be displayed on the middle 7-segment LED (no change will happen to the others).l

( SW5: adds one and it will be displayed on the rightmost 7-segment LED (no change will happen to the others

 SW2: will be free, will be used in the 3rd checkout.

 The answer should be displayed using the Decimal Numeral System (Base Ten). If you were only able to use the Hexadecimal Numeral System (Base sixteen): 2 points will be reduced.

 Each digit will overflow back to zero. If the digit was 9 and then you added 1, it will go back to zero.

 The 7-Segment LEDs must show the answer for 1 seconds and then light off to wait for another switch to be pushed

 Get rid of Debouncing.

 SW2 will be used to send a signal to the LCD.

 The Signal depends on the combination you have on the 7 segment display.

 For the combination of “540” the LCD should display “Correct Combination”

 For other combinations, the LCD should Display “Wrong Combination”