موقع يكشف لك هل جهازك مخترق

سلام الله عليكم

اخى البرعمي اولا كل عام وانت بخير

بالنسبة للموقع الذى تكلمت عنه هو بالفعل احد المواقع التى تفيد فى الفحص عن التروجان

ويوجد اداوت بدون الحاجة الى مواقع فحص ومنها الامر netstat

ولك فى هذه القائمة كافة الاوامر الملحقة

اقتباس

Netstat Manual Page

NETSTAT(1)     FreeBSD Reference Manual      NETSTAT(1)

NAME

    netstat - show network status

SYNOPSIS

    netstat [-Aan] [-f address_family] [system] [core]

    netstat [-himnrRs] [-f address_family] [-M core] [-N system]

    netstat [-n] [-I [interface]] [-M core] [-N system] [-w wait]

    netstat [-p protocol] [-M core] [-N system]

DESCRIPTION

    The netstat command symbolically displays the contents of various net-

    work-related data structures.  There are a number of output formats, de-

    pending on the options for the information presented.  The first form of

    the command displays a list of active sockets for each protocol.  The

    second form presents the contents of one of the other network data struc-

    tures according to the option selected.  Using the third form, with a

    wait interval specified, netstat will continuously display the informa-

    tion regarding packet traffic on the configured network interfaces.  The

    fourth form displays statistics about the named protocol.

    The options have the following meaning:

    -A    With the default display, show the address of any protocol control

   blocks associated with sockets; used for debugging.

    -a    With the default display, show the state of all sockets; normally

   sockets used by server processes are not shown.

    -d    With either interface display (option -i or an interval, as de-

   scribed below), show the number of dropped packets.

    -g    Show multicast routing statistics.  When -s is also present, show

   multicast routing statistics instead.

    -h    Show the state of the IMP host table.

    -i    Show the state of interfaces which have been auto-configured (in-

   terfaces statically configured into a system, but not located at

   boot time are not shown).

    -I interface

   Show information only about this interface; used with an wait in-

   terval as described below.

    -M    Extract values associated with the name list from the specified

   core instead of the default /dev/kmem.

    -m    Show statistics recorded by the memory management routines (the

   network manages a private pool of memory buffers).

    -N    Extract the name list from the specified system instead of the de-

   fault /386bsd.

    -n    Show network addresses as numbers (normally netstat interprets ad-

   dresses and attempts to display them symbolically). This option

   may be used with any of the display formats.

    -p protocol

   Show statistics about protocol, which is either a well-known name

   for a protocol or an alias for it.  Some protocol names and aliases

   are listed in the file /etc/protocols. A null response typically

   means that there are no interesting numbers to report.  The program

   will complain if protocol is unknown or if there is no statistics

   routine for it.

    -s    Show per-protocol statistics.

    -r    Show the routing tables.  When -s is also present, show routing

   statistics instead.

    -f address_family

   Limit statistics or address control block reports to those of the

   specified address family. The following address families are recog-

   nized: inet, for AF_INET, ns, for AF_NS, and unix, for AF_UNIX.

    The default display, for active sockets, shows the local and remote ad-

    dresses, send and receive queue sizes (in bytes), protocol, and the in-

    ternal state of the protocol.  Address formats are of the form

    ``host.port'' or ``network.port'' if a socket's address specifies a net-

    work but no specific host address.  When known the host and network ad-

    dresses are displayed symbolically according to the data bases /etc/hosts

    and /etc/networks, respectively.  If a symbolic name for an address is

    unknown, or if the -n option is specified, the address is printed numeri-

    cally, according to the address family.  For more information regarding

    the Internet ``dot format,'' refer to inet(3)).  Unspecified, or ``wild-

    card'', addresses and ports appear as ``*''.

    The interface display provides a table of cumulative statistics regarding

    packets transferred, errors, and collisions.  The network addresses of

    the interface and the maximum transmission unit (``mtu'') are also dis-

    played.

    The routing table display indicates the available routes and their sta-

    tus.  Each route consists of a destination host or network and a gateway

    to use in forwarding packets.  The flags field shows the state of the

    route (``U'' if ``up''), whether the route is to a gateway (``G''),

    whether the route was created dynamically by a redirect (``D''), and

    whether the route has been modified by a redirect (``M'').  Direct routes

    are created for each interface attached to the local host; the gateway

    field for such entries shows the address of the outgoing interface.  The

    refcnt field gives the current number of active uses of the route.  Con-

    nection oriented protocols normally hold on to a single route for the du-

    ration of a connection while connectionless protocols obtain a route

    while sending to the same destination.  The use field provides a count of

    the number of packets sent using that route.  The interface entry indi-

    cates the network interface utilized for the route.

    When netstat is invoked with a wait interval argument, it displays a run-

    ning count of statistics related to network interfaces.  This display

    consists of a column for the primary interface (the first interface found

    during autoconfiguration) and a column summarizing information for all

    interfaces.  The primary interface may be replaced with another interface

    with the -I option.  The first line of each screen of information con-

    tains a summary since the system was last rebooted.  Subsequent lines of

    output show values accumulated over the preceding interval.

SEE ALSO

    iostat(1),  nfsstat(1),  ps(1),  vmstat(1),  hosts(5),  networks(5),

    protocols(5),  services(5),  trpt(8),  trsp(8)

HISTORY

    The netstat command appeared in 4.2BSD.

BUGS

    The notion of errors is ill-defined.

    Collisions mean something else for the IMP

هذه القائمة منشورة ضمن موقع

http://snowhite.cis.uoguelph.ca/course_inf...20/netstat.html

ويوجد اداة تتصل بالبروتكول tcp/ip

وهى مساعدة وفعالة جدا

تجدها فى هذه الوصلة

http://www.analogx.com/contents/download/n...network/nsl.htm

مع تحياتى واهلا بك وسهلا وننتظر المزيد

السلام عليكم

مشكورين