[مخالف]لا أستطيع الأتصال بالطرف الآخر للشبكة سيسكو 1800

هي السيتينغ كلها

-----------------------------------------------------------------------

Cisco Router and Security Device Manager (SDM) is installed on this device.

This feature requires the one-time use of the username "cisco"

with the password "cisco". The default username and password have a privilege le

vel of 15.

Please change these publicly known initial credentials using SDM or the IOS CLI.

Here are the Cisco IOS commands.

username <myuser> privilege 15 secret 0 <mypassword>

no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use

.

For more information about SDM please follow the instructions in the QUICK START

GUIDE for your router or go to http://www.cisco.com/go/sdm

-----------------------------------------------------------------------

User Access Verification

Username: cisco

Password:

yourname#show run

Building configuration...

Current configuration : 2164 bytes

!

version 12.4

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname yourname

!

boot-start-marker

boot-end-marker

!

logging buffered 51200 warnings

!

no aaa new-model

!

resource policy

!

mmi polling-interval 60

no mmi auto-configure

no mmi pvc

mmi snmp-timeout 180

ip subnet-zero

ip cef

!

!

no ip dhcp use vrf connected

!

!

ip domain name yourdomain.com

!

username cisco privilege 15 secret 5 $1$aYb4$3/F8X8z3b/dCDc6tVULpg1

!

!

!

interface FastEthernet0/0

description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0$

ip address 192.168.1.1 255.255.255.0

ip nat inside

duplex auto

speed auto

!

interface FastEthernet0/1

ip address 10.1.1.10 255.255.255.252

ip nat outside

duplex auto

speed auto

!

ip classless

no ip route static inter-vrf

ip route 0.0.0.0 0.0.0.0 10.1.1.9

!

ip http server

ip http access-class 23

ip http authentication local

ip http timeout-policy idle 60 life 86400 requests 10000

ip nat pool my 192.168.1.1 192.168.1.254 netmask 255.255.255.0

ip nat inside source list 1 pool my

!

access-list 1 permit 192.168.1.0 0.0.0.255

!

control-plane

!

banner login ^C

-----------------------------------------------------------------------

Cisco Router and Security Device Manager (SDM) is installed on this device.

This feature requires the one-time use of the username "cisco"

with the password "cisco". The default username and password have a privilege le

vel of 15.

Please change these publicly known initial credentials using SDM or the IOS CLI.

Here are the Cisco IOS commands.

username <myuser> privilege 15 secret 0 <mypassword>

no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use

.

For more information about SDM please follow the instructions in the QUICK START

GUIDE for your router or go to http://www.cisco.com/go/sdm

-----------------------------------------------------------------------

^C

!

line con 0

login local

line aux 0

line vty 0 4

access-class 23 in

privilege level 15

login local

transport input telnet

line vty 5 15

access-class 23 in

privilege level 15

login local

transport input telnet

!

end

yourname#

الأخ الكريم/الأخت الكريمة

السلام عليكم ورحمة الله وبركاته

مرحباً بكم في منتدى الفريق العربي للبرمجة

تأسف إدارة المنتدى لغلق الموضوع وذلك لمخالفته قوانين المشاركات .

قواعد طرح المشاركات

/index.php?showtopic=29343

شاكرين لكم حُسن تعاونكم