الفريق العربي للبرمجةأرشيف المنتديات · 2000 – 2023
نسخة أرشيفية للقراءة فقط — التسجيل والمشاركة مغلقان، والمحتوى محفوظ كما كان.

الراوتر يقوم بعمل boot مرتين

مغلق
بدأه مصعب غيلان في 16 أكتوبر 2006 · 3 رد · 1,084 مشاهدة · في منتدى الشبكات العام
مشاركة: واتساب X فيسبوك تيليجرام
#1 صاحب الموضوع

قمت بتحميل نسخة أخرى من نظام التشغيل للرواتر عبر Xmodem بعد ان انضربت النسخة الاولى من نظام التشغيل

ولكن بعد إعادة التشغيل يحصل عملية boot مرتين كما هو واضح في output للراوتر

مع العلم بأني غيرت الـ Boot لكي يتم من الملف الجديد الذي حملته

وهذا Boot

*Mar  1 00:00:54.699: %SYS-5-RELOAD: Reload requested by admin on console. Reloa																				
d Reason: Reload command.						 
System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)																	 
Copyright (c) 2003 by cisco Systems, Inc.										 
C2600 platform with 98304 Kbytes of main memory											   

program load complete, entry point: 0x8  

Self decompressing the image : ################################################################################################################################################### [OK]					

Smart Init is enabled					 
smart init is sizing iomem						  
  ID			MEMORY_REQ				 TYPE											   
00036C		  0X000B3B80 C2620XM Single Fast Ethernet													   
000021		  0X000C7B00 Octal port S/T interface Multi-BRI															 
				0X00098670 public buffer pools											  
				0X00211000 public particle pools												
TOTAL:		  0X00				  

If any of the above Memory Requirements are										   
"UNKNOWN", you may be using an unsupported										  
configuration or there is a software problem and												
system operation may be compromised.									
Rounded IOMEM up to: 5Mb.						 
Using 5 percent iomem. [5Mb/96Mb]								 

 Slot is empty or does not support clock participate													
 WIC slot is empty or does not support clock participate program load complete,																			   
entry point: 0x80008000, size: 0x8d9acc									   
Self decompressing the image : ################################################################################################################################################### [OK]					

Smart Init is enabled					 
smart init is sizing iomem						  
  ID			MEMORY_REQ				 TYPE											   
00036C		  0X000B3B80 C2620XM Single Fast Ethernet													   
000021		  0X000C7B00 Octal port S/T interface Multi-BRI															 
				0X00098670 public buffer pools											  
				0X00211000 public particle pools												
TOTAL:		  0X00424CF0						  

If any of the above Memory Requirements are										   
"UNKNOWN", you may be using an							
configuration or there is a software problem and												
system operation may be compromised.									
Rounded IOMEM up to: 5Mb.						 
Using 5 percent iomem. [5Mb/96Mb]								 

			  Restricted Rights Legend									  

Use, duplication, or disclosure by the Government is													
subject to restrictions as set forth in subparagraph													
(c) of the Commercial Computer Software - Restricted													
Rights clause at FAR sec. 52.227-19 and subparagraph													
(c) (1) (ii) of the Rights in Technical Data and Computer														 
Software clause at DFARS sec. 252.227-7013.										   

		   cisco				 
		   170 West Tasman Drive								
		   San Jose, California 95134-1706										  



Cisco Internetwork Operating System Software											
IOS (tm) C2600 Software (C2600-IPBASE-M), Version 12.3(6a), RELEASE SOFTWARE (fc																				
4)  
Copyright (c) 1986-2004 by cisco Systems, Inc.											  
Compiled Fri 02-Apr-04 19:17 by kellythw										
Image text-base: 0x80008098, data-base: 0x80ECF498												  

cisco 2620XM (MPC860P) processor (revision 0x300) with 93184K/5120K bytes of mem																				
ory.	
Processor board ID JAE0816D3BR (63783341)										 
M860 processor: part number 5, mask 2									 
Bridging software.				  
X.25 software, Version 3.0.0.							 
Basic Rate ISDN software, Version 1.1.									  
1 FastEthernet/IEEE 802.3 interface(s)									  
1 Serial network interface(s)							 
9 ISDN Basic Rate interface(s)							  
32K bytes of non-volatile configuration memory.											   
32768K bytes of processor board System flash (Read/Write)														 

 Slot is empty or does not support clock participate													
 WIC slot is empty or does not support clock participate														


Press RETURN to get started!							


*Mar  1 00:00:10.615: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state t																				
o up	
*Mar  1 00:00:10.615: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down																				

*Mar  1 00:00:11.723: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern																				
et0/0, changed state to down							
*Mar  1 00:00:11.723: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0,																				
 changed state to down					  
*Mar  1 00:00:12.331: %LINK-5-CHANGED: Interface BRI1/1, changed state to admini																				
stratively down			   
*Mar  1 00:00:12.331: %LINK-5-CHANGED: Interface BRI0/0, changed state to admini																				
stratively down			   
*Mar  1 00:00:12.335: %LINK-5-CHANGED: Interface BRI1/0, changed state to admini																				
stratively down			   
*Mar  1 00:00:12.583: %LINK-5-CHANGED: Interface BRI1/2, changed state to admini																				
stratively down			   
*Mar  1 00:00:12.843: %LINK-5-CHANGED: Interface BRI1/3, changed state to admini																				
stratively down			   
*Mar  1 00:00:12.843: %LINK-5-CHANGED: Interface BRI1/4, changed state to admini																				
stratively down			   
*Mar  1 00:00:12.843: %LINK-5-CHANGED: Interface BRI1/7, changed state to admini																				
stratively down			   
*Mar  1 00:00:12.843: %LINK-5-CHANGED: Interface BRI1/5, changed state to admini																				
stratively down			   
*Mar  1 00:00:13.203: %LINK-5-CHANGED: Interface BRI1/6, changed state to admini																				
stratively down			   
*Mar  1 00:00:13.403: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/1, ch																				
anged state to down				   
*Mar  1 00:00:13.403: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0, ch
anged state to down
*Mar  1 00:00:13.403: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/0, ch
anged state to down
*Mar  1 00:00:13.411: %SYS-5-CONFIG_I: Configured from memory by console
*Mar  1 00:00:13.671: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/2, ch
anged state to down
*Mar  1 00:00:13.943: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/3, ch
anged state to down
*Mar  1 00:00:13.943: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/4, ch
anged state to down
*Mar  1 00:00:13.943: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/7, ch
anged state to down
*Mar  1 00:00:13.943: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/5, ch
anged state to down
*Mar  1 00:00:14.215: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/6, ch
anged state to down
*Mar  1 00:00:15.847: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IPBASE-M), Version 12.3(6a), RELEASE SOFTWARE (fc
4)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 02-Apr-04 19:17 by kellythw
*Mar  1 00:00:15.851: %SNMP-5-COLDSTART: SNMP agent on host TIIB_AECG is undergo
ing a cold start

وهذا show version

Cisco Internetwork Operating System Software											
IOS (tm) C2600 Software (C2600-IPBASE-M), Version 12.3(6a), RELEASE SOFTWARE (fc																				
4)  
Copyright (c) 1986-2004 by cisco Systems, Inc.											  
Copyright (c) 1986-2004 by cisco Systems, Inc.											  
Image text-base: 0x80008098, data-base: 0x80ECF498

ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

TIIB_AECG uptime is 17 minutes
System returned to ROM by reload
System image file is "flash:c2600-ipbase-mz.123-6a.bin"

cisco 2620XM (MPC860P) processor (revision 0x300) with 93184K/5120K bytes of mem
ory.
Processor board ID JAE0816D3BR (63783341)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
9 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

وهذا بعض show run

!				
! 
boot-start-marker				 
boot system flash c2600-ipbase-mz.123-6a.bin											
boot-end-marker
! 
! 
interface FastEthernet0/0								   
 duplex auto			
 speed auto		   
! 
interface Serial0/0				   
 no ip address			  
 encapsulation frame-relay IETF							   
 cdp enable		   
 frame-relay lmi-type q933a						   
! 
! 
interface Dialer1				 
 encapsulation ppp				  
 dialer pool 1			  
 dialer remote-name AECG						
 dialer string 470976					 
 dialer-group 5			   
 ppp authentication chap						
ip http server
!
dialer-list 5 protocol ip permit
!
line con 0
line aux 0
!
!
end
#2

هل مسحت الـimage السابق؟

يبدوا انك لم تمسحه

قم بنسخ الimage القديم من باب الإحتياط إلى جهازك من خلال tftp

وبعدها امسح الimage القديم من الrouter وان شاء الله تنحل المشكلة

إذا نفعتك أحد مشاركاتي فأدع بظهر الغيب لوالداي بالصحة والسلامة والسعادة وطول العمر وأن يكون هذا زيادة لهما في كل خير.

post-21836-1257612765.gif

before asking: smart questions how-to

#3

لا طبعا قد تأكدت من مسح النسخة القديمة

ويمكنك رؤية هذا

sh flash:

System flash directory:
File  Length   Name/status
  1   9280488  c2600-ipbase-mz.123-6a.bin
[9280552 bytes used, 23749592 available, 33030144 total]
32768K bytes of processor board System flash (Read/Write)

وكما رأيت من عملية Boot تكرار self decopressing

Self decompressing the image : ################################################################################################################################################### [OK]
#4

كيف مسحت الimage القديم؟

إذا نفعتك أحد مشاركاتي فأدع بظهر الغيب لوالداي بالصحة والسلامة والسعادة وطول العمر وأن يكون هذا زيادة لهما في كل خير.

post-21836-1257612765.gif

before asking: smart questions how-to

هذا الموضوع مغلق.

مواضيع مشابهة