[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 22:56:21 UTC 2008 (Ubuntu 2.6.24-19.41-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000077fa0000 (usable)
[    0.000000]  BIOS-e820: 0000000077fa0000 - 0000000077fae000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000077fae000 - 0000000077ff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000077ff0000 - 0000000078000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] 1023MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000ff780
[    0.000000] Entering add_active_range(0, 0, 491424) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   491424
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   491424
[    0.000000] On node 0 totalpages: 491424
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2047 pages used for memmap
[    0.000000]   HighMem zone: 260001 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F8070 checksum 0
[    0.000000] ACPI: RSDP 000F8070, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 77FA0000, 003C (r1 A_M_I_ OEMRSDT   6000812 MSFT       97)
[    0.000000] ACPI: FACP 77FA0200, 0084 (r2 A_M_I_ OEMFACP   6000812 MSFT       97)
[    0.000000] ACPI: DSDT 77FA0630, 75FA (r1  A0669 A0669000        0 INTL 20060113)
[    0.000000] ACPI: FACS 77FAE000, 0040
[    0.000000] ACPI: APIC 77FA0390, 005C (r1 A_M_I_ OEMAPIC   6000812 MSFT       97)
[    0.000000] ACPI: MCFG 77FA03F0, 003C (r1 A_M_I_ OEMMCFG   6000812 MSFT       97)
[    0.000000] ACPI: SLIC 77FA0430, 0176 (r1 A_M_I_ OEMSLIC   6000812 MSFT       97)
[    0.000000] ACPI: BOOT 77FA0600, 0028 (r1 A_M_I_ OEMBOOT   6000812 MSFT       97)
[    0.000000] ACPI: OEMB 77FAE040, 005B (r1 A_M_I_ AMI_OEM   6000812 MSFT       97)
[    0.000000] ATI board detected. Disabling timer routing over 8254.
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 78000000:86e00000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 487585
[    0.000000] Kernel command line: root=UUID=54487E64487E44B0 loop=/ubuntu/disks/root.disk ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1862.138 MHz processor.
[   27.876143] Console: colour VGA+ 80x25
[   27.876150] console [tty0] enabled
[   27.877063] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   27.877572] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   27.961632] Memory: 1936644k/1965696k available (2177k kernel code, 27912k reserved, 1006k data, 368k init, 1048192k highmem)
[   27.961641] virtual kernel memory layout:
[   27.961642]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   27.961643]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   27.961644]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   27.961645]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   27.961646]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   27.961647]       .data : 0xc03204c4 - 0xc041bdc4   (1006 kB)
[   27.961648]       .text : 0xc0100000 - 0xc03204c4   (2177 kB)
[   27.961651] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   27.961735] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   28.041642] Calibrating delay using timer specific routine.. 3728.24 BogoMIPS (lpj=7456481)
[   28.041691] Security Framework initialized
[   28.041706] SELinux:  Disabled at boot.
[   28.041729] AppArmor: AppArmor initialized
[   28.041734] Failure registering capabilities with primary security module.
[   28.041746] Mount-cache hash table entries: 512
[   28.041946] Initializing cgroup subsys ns
[   28.041956] Initializing cgroup subsys cpuacct
[   28.041972] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[   28.041981] monitor/mwait feature present.
[   28.041982] using mwait in idle threads.
[   28.041987] CPU: L1 I cache: 32K, L1 D cache: 32K
[   28.041989] CPU: L2 cache: 1024K
[   28.041993] CPU: Physical Processor ID: 0
[   28.041994] CPU: Processor Core ID: 0
[   28.041996] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
[   28.042009] Compat vDSO mapped to ffffe000.
[   28.042031] Checking 'hlt' instruction... OK.
[   28.058032] SMP alternatives: switching to UP code
[   28.059763] Early unpacking initramfs... done
[   28.382760] ACPI: Core revision 20070126
[   28.382819] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   28.440955] CPU0: Intel(R) Pentium(R) Dual  CPU  T2390  @ 1.86GHz stepping 0d
[   28.440976] SMP alternatives: switching to SMP code
[   28.441761] Booting processor 1/1 eip 3000
[   28.476859] Initializing CPU#1
[   28.556813] Calibrating delay using timer specific routine.. 3724.51 BogoMIPS (lpj=7449033)
[   28.556820] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[   28.556825] monitor/mwait feature present.
[   28.556828] CPU: L1 I cache: 32K, L1 D cache: 32K
[   28.556830] CPU: L2 cache: 1024K
[   28.556832] CPU: Physical Processor ID: 0
[   28.556833] CPU: Processor Core ID: 1
[   28.556835] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
[   28.557335] CPU1: Intel(R) Pentium(R) Dual  CPU  T2390  @ 1.86GHz stepping 0d
[   28.557358] Total of 2 processors activated (7452.75 BogoMIPS).
[   28.557531] ENABLING IO-APIC IRQs
[   28.557716] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   28.704712] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   28.724694] Brought up 2 CPUs
[   28.724714] CPU0 attaching sched-domain:
[   28.724717]  domain 0: span 03
[   28.724718]   groups: 01 02
[   28.724721] CPU1 attaching sched-domain:
[   28.724723]  domain 0: span 03
[   28.724724]   groups: 02 01
[   28.724941] net_namespace: 64 bytes
[   28.724951] Booting paravirtualized kernel on bare hardware
[   28.725382] Time: 21:57:51  Date: 11/13/08
[   28.725411] NET: Registered protocol family 16
[   28.725586] EISA bus registered
[   28.725591] ACPI: bus type pci registered
[   28.725843] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8
[   28.725845] PCI: Using configuration type 1
[   28.725864] Setting up standard PCI resources
[   28.729687] ACPI: EC: Look up EC in DSDT
[   28.746013] ACPI: Interpreter enabled
[   28.746016] ACPI: (supports S0 S1 S3 S4 S5)
[   28.746035] ACPI: Using IOAPIC for interrupt routing
[   28.752350] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[   28.752352] ACPI: EC: driver started in poll mode
[   28.752463] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   28.752834] pci 0000:00:12.0: set SATA to AHCI mode
[   28.754428] PCI: Transparent bridge - 0000:00:14.4
[   28.754475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   28.754601] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   28.754736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[   28.754842] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[   28.754946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[   28.755094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[   28.759590] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12)
[   28.759727] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12)
[   28.759860] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 12)
[   28.759992] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12)
[   28.760125] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12) *0, disabled.
[   28.760258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12) *0, disabled.
[   28.760391] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12)
[   28.760528] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12) *0, disabled.
[   28.760661] Linux Plug and Play Support v0.97 (c) Adam Belay
[   28.760691] pnp: PnP ACPI init
[   28.760699] ACPI: bus type pnp registered
[   28.762818] pnp: PnP ACPI: found 11 devices
[   28.762820] ACPI: ACPI bus type pnp unregistered
[   28.762824] PnPBIOS: Disabled by ACPI PNP
[   28.763045] PCI: Using ACPI for IRQ routing
[   28.763048] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   28.800622] NET: Registered protocol family 8
[   28.800624] NET: Registered protocol family 20
[   28.800696] AppArmor: AppArmor Filesystem Enabled
[   28.804434] Time: tsc clocksource has been installed.
[   28.828430] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[   28.828433] system 00:05: ioport range 0x40b-0x40b has been reserved
[   28.828435] system 00:05: ioport range 0x4d6-0x4d6 has been reserved
[   28.828438] system 00:05: ioport range 0xc00-0xc01 has been reserved
[   28.828440] system 00:05: ioport range 0xc14-0xc14 has been reserved
[   28.828442] system 00:05: ioport range 0xc50-0xc51 has been reserved
[   28.828444] system 00:05: ioport range 0xc52-0xc52 has been reserved
[   28.828447] system 00:05: ioport range 0xc6c-0xc6c has been reserved
[   28.828449] system 00:05: ioport range 0xc6f-0xc6f has been reserved
[   28.828451] system 00:05: ioport range 0xcd0-0xcd1 has been reserved
[   28.828454] system 00:05: ioport range 0xcd2-0xcd3 has been reserved
[   28.828456] system 00:05: ioport range 0xcd4-0xcd5 has been reserved
[   28.828458] system 00:05: ioport range 0xcd6-0xcd7 has been reserved
[   28.828460] system 00:05: ioport range 0xcd8-0xcdf has been reserved
[   28.828463] system 00:05: ioport range 0x800-0x89f has been reserved
[   28.828465] system 00:05: ioport range 0xb00-0xb1f could not be reserved
[   28.828468] system 00:05: ioport range 0x900-0x90f has been reserved
[   28.828470] system 00:05: ioport range 0x910-0x91f has been reserved
[   28.828473] system 00:05: ioport range 0xfe00-0xfefe has been reserved
[   28.828475] system 00:05: ioport range 0x4000-0x40fe has been reserved
[   28.828478] system 00:05: iomem range 0xfed45000-0xfed89fff has been reserved
[   28.828481] system 00:05: iomem range 0xffb80000-0xffbfffff could not be reserved
[   28.828483] system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
[   28.828491] system 00:08: ioport range 0x250-0x253 has been reserved
[   28.828493] system 00:08: ioport range 0x256-0x25f has been reserved
[   28.828496] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
[   28.828498] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[   28.828504] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[   28.828509] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[   28.828512] system 00:0a: iomem range 0xc0000-0xcffff could not be reserved
[   28.828514] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[   28.828517] system 00:0a: iomem range 0x100000-0x77ffffff could not be reserved
[   28.828519] system 00:0a: iomem range 0x0-0x0 could not be reserved
[   28.858862] PCI: Bridge: 0000:00:01.0
[   28.858865]   IO window: 9000-9fff
[   28.858869]   MEM window: fa800000-fa8fffff
[   28.858873]   PREFETCH window: bdf00000-ddefffff
[   28.858876] PCI: Bridge: 0000:00:04.0
[   28.858877]   IO window: disabled.
[   28.858881]   MEM window: fa900000-fa9fffff
[   28.858884]   PREFETCH window: disabled.
[   28.858887] PCI: Bridge: 0000:00:05.0
[   28.858889]   IO window: a000-bfff
[   28.858893]   MEM window: faa00000-fe9fffff
[   28.858896]   PREFETCH window: ddf00000-dfefffff
[   28.858900] PCI: Bridge: 0000:00:06.0
[   28.858901]   IO window: disabled.
[   28.858904]   MEM window: fea00000-feafffff
[   28.858907]   PREFETCH window: disabled.
[   28.858910] PCI: Bridge: 0000:00:07.0
[   28.858911]   IO window: disabled.
[   28.858915]   MEM window: disabled.
[   28.858917]   PREFETCH window: disabled.
[   28.858921] PCI: Bridge: 0000:00:14.4
[   28.858922]   IO window: disabled.
[   28.858928]   MEM window: disabled.
[   28.858933]   PREFETCH window: disabled.
[   28.858962] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   28.858973] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   28.858984] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   28.858995] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   28.859016] NET: Registered protocol family 2
[   28.900368] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   28.900663] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   28.901699] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   28.902620] TCP: Hash tables configured (established 131072 bind 65536)
[   28.902624] TCP reno registered
[   28.912519] checking if image is initramfs... it is
[   29.355691] Switched to high resolution mode on CPU 1
[   29.359548] Switched to high resolution mode on CPU 0
[   29.553604] Freeing initrd memory: 7567k freed
[   29.553886] Simple Boot Flag at 0xff set to 0x1
[   29.554590] audit: initializing netlink socket (disabled)
[   29.554614] audit(1226613471.392:1): initialized
[   29.554865] highmem bounce pool size: 64 pages
[   29.556775] VFS: Disk quotas dquot_6.5.1
[   29.556856] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   29.557004] io scheduler noop registered
[   29.557007] io scheduler anticipatory registered
[   29.557009] io scheduler deadline registered
[   29.557018] io scheduler cfq registered (default)
[   29.678965] Boot video device is 0000:01:05.0
[   29.679080] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   29.679119] assign_interrupt_mode Found MSI capability
[   29.679161] Allocate Port Service[0000:00:04.0:pcie00]
[   29.679243] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   29.679281] assign_interrupt_mode Found MSI capability
[   29.679316] Allocate Port Service[0000:00:05.0:pcie00]
[   29.679395] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   29.679433] assign_interrupt_mode Found MSI capability
[   29.679468] Allocate Port Service[0000:00:06.0:pcie00]
[   29.679547] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   29.679585] assign_interrupt_mode Found MSI capability
[   29.679620] Allocate Port Service[0000:00:07.0:pcie00]
[   29.679844] isapnp: Scanning for PnP cards...
[   30.034094] isapnp: No Plug & Play device found
[   30.057592] Real Time Clock Driver v1.12ac
[   30.057736] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   30.058972] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   30.059041] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   30.059141] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   30.061795] i8042.c: Detected active multiplexing controller, rev 1.1.
[   30.063218] serio: i8042 KBD port at 0x60,0x64 irq 1
[   30.063223] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   30.063226] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   30.063228] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   30.063230] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   30.082498] mice: PS/2 mouse device common for all mice
[   30.082616] EISA: Probing bus 0 at eisa.0
[   30.082639] Cannot allocate resource for EISA slot 4
[   30.082659] EISA: Detected 0 cards.
[   30.082662] cpuidle: using governor ladder
[   30.082664] cpuidle: using governor menu
[   30.082774] NET: Registered protocol family 1
[   30.082805] Using IPI No-Shortcut mode
[   30.082844] registered taskstats version 1
[   30.082968]   Magic number: 0:678:1005
[   30.082975]   hash matches device ttye4
[   30.083100]   hash matches device 00:07
[   30.083118] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   30.083119] EDD information not available.
[   30.083447] Freeing unused kernel memory: 368k freed
[   30.115483] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   31.292377] fuse init (API version 7.9)
[   31.314541] ACPI: SSDT 77FA7C30, 0C99 (r1    AMI   CPU1PM        1 INTL 20060113)
[   31.315068] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   31.315073] ACPI: Processor [CPU1] (supports 8 throttling states)
[   31.315130] ACPI: SSDT 77FA88D0, 0C99 (r1    AMI   CPU2PM        1 INTL 20060113)
[   31.315614] ACPI: CPU1 (power states: C1[C1] C2[C2])
[   31.316827] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   31.320187] ACPI: Thermal Zone [THRM] (50 C)
[   31.640537] SCSI subsystem initialized
[   31.657551] libata version 3.00 loaded.
[   31.663251] ahci 0000:00:12.0: version 3.0
[   31.663294] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16
[   31.663334] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[   31.663336] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
[   31.691274] usbcore: registered new interface driver usbfs
[   31.691301] usbcore: registered new interface driver hub
[   31.692236] usbcore: registered new device driver usb
[   31.696594] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   32.661923] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[   32.661929] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pio slum part 
[   32.662406] scsi0 : ahci
[   32.662740] scsi1 : ahci
[   32.662893] scsi2 : ahci
[   32.663020] scsi3 : ahci
[   32.663112] ata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 16
[   32.663116] ata2: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 irq 16
[   32.663119] ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 16
[   32.663123] ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe80 irq 16
[   33.137081] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   33.137568] ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
[   33.137571] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   33.138071] ata1.00: configured for UDMA/133
[   33.449547] ata2: SATA link down (SStatus 0 SControl 300)
[   33.760013] ata3: SATA link down (SStatus 0 SControl 300)
[   34.071479] ata4: SATA link down (SStatus 0 SControl 300)
[   34.071665] scsi 0:0:0:0: Direct-Access     ATA      ST9250827AS      3.AA PQ: 0 ANSI: 5
[   34.071841] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 17
[   34.071879] ohci_hcd 0000:00:13.0: OHCI Host Controller
[   34.072251] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[   34.072279] ohci_hcd 0000:00:13.0: irq 17, io mem 0xfebfe000
[   34.079540] Driver 'sd' needs updating - please use bus_type methods
[   34.079660] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   34.079673] sd 0:0:0:0: [sda] Write Protect is off
[   34.079675] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   34.079691] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   34.079745] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   34.079754] sd 0:0:0:0: [sda] Write Protect is off
[   34.079756] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   34.079771] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   34.079775]  sda: sda1 sda2 <<6>usb usb1: configuration #1 chosen from 1 choice
[   34.131529] hub 1-0:1.0: USB hub found
[   34.131541] hub 1-0:1.0: 2 ports detected
[   34.138435]  sda5 sda6 sda7 sda8 >
[   34.189141] sd 0:0:0:0: [sda] Attached SCSI disk
[   34.193823] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   34.232342] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 18
[   34.232368] ohci_hcd 0000:00:13.1: OHCI Host Controller
[   34.232398] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[   34.232424] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfebfd000
[   34.291187] usb usb2: configuration #1 chosen from 1 choice
[   34.291210] hub 2-0:1.0: USB hub found
[   34.291219] hub 2-0:1.0: 2 ports detected
[   34.392079] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 19
[   34.392112] ohci_hcd 0000:00:13.2: OHCI Host Controller
[   34.392149] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[   34.392172] ohci_hcd 0000:00:13.2: irq 19, io mem 0xfebfc000
[   34.451939] usb usb3: configuration #1 chosen from 1 choice
[   34.451968] hub 3-0:1.0: USB hub found
[   34.451980] hub 3-0:1.0: 2 ports detected
[   34.542673] usb 1-1: new low speed USB device using ohci_hcd and address 2
[   34.555773] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 18
[   34.555801] ohci_hcd 0000:00:13.3: OHCI Host Controller
[   34.555834] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
[   34.555852] ohci_hcd 0000:00:13.3: irq 18, io mem 0xfebfb000
[   34.615677] usb usb4: configuration #1 chosen from 1 choice
[   34.615705] hub 4-0:1.0: USB hub found
[   34.615716] hub 4-0:1.0: 2 ports detected
[   34.718469] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 19
[   34.718492] ohci_hcd 0000:00:13.4: OHCI Host Controller
[   34.718521] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
[   34.718542] ohci_hcd 0000:00:13.4: irq 19, io mem 0xfebfa000
[   34.761444] usb 1-1: configuration #1 chosen from 1 choice
[   34.779335] usb usb5: configuration #1 chosen from 1 choice
[   34.779362] hub 5-0:1.0: USB hub found
[   34.779370] hub 5-0:1.0: 2 ports detected
[   34.882575] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17
[   34.882629] PCI: Setting latency timer of device 0000:00:14.1 to 64
[   34.882644] ACPI: PCI interrupt for device 0000:00:14.1 disabled
[   34.883364] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 20
[   34.883380] ehci_hcd 0000:00:13.5: EHCI Host Controller
[   34.883417] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
[   34.883462] ehci_hcd 0000:00:13.5: debug port 1
[   34.883475] ehci_hcd 0000:00:13.5: irq 20, io mem 0xfebff800
[   34.898050] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   34.898221] usb usb6: configuration #1 chosen from 1 choice
[   34.898245] hub 6-0:1.0: USB hub found
[   34.898253] hub 6-0:1.0: 10 ports detected
[   34.998046] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17
[   34.998327] scsi4 : pata_atiixp
[   34.998954] scsi5 : pata_atiixp
[   34.999738] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[   34.999741] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[   35.017917] usb 1-1: USB disconnect, address 2
[   35.017946] usbcore: registered new interface driver hiddev
[   35.341823] ata5.00: ATAPI: SlimtypeDVD A  DS8A1P, CA24, max UDMA/33
[   35.537455] ata5.00: configured for UDMA/33
[   35.694985] scsi 4:0:0:0: CD-ROM            Slimtype DVD A  DS8A1P    CA24 PQ: 0 ANSI: 5
[   35.695069] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[   35.703514] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   35.703519] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   35.711454] Driver 'sr' needs updating - please use bus_type methods
[   35.727040] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   35.727044] Uniform CD-ROM driver Revision: 3.20
[   35.727098] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   36.064073] usb 6-4: new high speed USB device using ehci_hcd and address 4
[   36.216580] usb 6-4: configuration #1 chosen from 1 choice
[   36.456402] usb 6-7: new high speed USB device using ehci_hcd and address 5
[   36.606351] usb 6-7: configuration #1 chosen from 1 choice
[   36.609910] usbcore: registered new interface driver usbhid
[   36.609915] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   36.622882] usbcore: registered new interface driver libusual
[   36.627499] Initializing USB Mass Storage driver...
[   36.909173] loop: module loaded
[   36.920168] usb 1-1: new low speed USB device using ohci_hcd and address 3
[   36.943081] kjournald starting.  Commit interval 5 seconds
[   36.943098] EXT3-fs: mounted filesystem with ordered data mode.
[   37.137539] usb 1-1: configuration #1 chosen from 1 choice
[   37.144651] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input2
[   37.154283] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-1
[   37.466685] usb 1-2: new full speed USB device using ohci_hcd and address 4
[   37.767495] usb 1-2: configuration #1 chosen from 1 choice
[   37.770659] scsi6 : SCSI emulation for USB Mass Storage devices
[   37.770721] usb-storage: device found at 4
[   37.770723] usb-storage: waiting for device to settle before scanning
[   37.770739] usbcore: registered new interface driver usb-storage
[   37.770742] USB Mass Storage support registered.
[   42.761289] usb-storage: device scan complete
[   42.768272] scsi 6:0:0:0: Direct-Access     Generic- xD/SDMMC/MS/Pro  1.00 PQ: 0 ANSI: 0 CCS
[   42.772769] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   42.772807] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   46.124184] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   46.223779] Linux agpgart interface v0.102
[   46.264555] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   46.308531] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   46.400357] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[   46.449353] input: Power Button (FF) as /devices/virtual/input/input4
[   46.475306] ACPI: Power Button (FF) [PWRF]
[   46.475464] input: Lid Switch as /devices/virtual/input/input5
[   46.476772] ACPI: Lid Switch [LID]
[   46.476862] input: Power Button (CM) as /devices/virtual/input/input6
[   46.507246] ACPI: Power Button (CM) [PWRB]
[   46.507340] input: Sleep Button (CM) as /devices/virtual/input/input7
[   46.539194] ACPI: Sleep Button (CM) [SLPB]
[   46.683166] asus-laptop: Asus Laptop Support version 0.42
[   46.683428] asus-laptop:   F5RL model detected
[   47.040724] ACPI: AC Adapter [AC0] (on-line)
[   47.300535] ath_hal: module license 'Proprietary' taints kernel.
[   47.306612] ACPI: Battery Slot [BAT0] (battery present)
[   47.310198] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[   47.327118] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input8
[   47.352818] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   47.517609] wlan: 0.9.4
[   47.613328] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[   47.637448] Attansic(R) L2 Ethernet Network Driver - version 1.0.40.2
[   47.637452] Copyright (c) 2006 Attansic Corporation.
[   47.637537] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 19
[   47.637550] PCI: Setting latency timer of device 0000:06:00.0 to 64
[   47.662357] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   47.686959] ath_pci: 0.9.4
[   47.746043] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[   47.746058] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   47.770434] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
[   47.770464] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[   47.893233] Bluetooth: Core ver 2.11
[   47.899434] NET: Registered protocol family 31
[   47.899438] Bluetooth: HCI device and connection manager initialized
[   47.899443] Bluetooth: HCI socket layer initialized
[   47.956631] Bluetooth: HCI USB driver ver 2.9
[   47.958681] usbcore: registered new interface driver hci_usb
[   48.045039] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17
[   48.067051] Linux video capture interface: v2.00
[   48.156074] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (174f:5a31)
[   48.172905] usbcore: registered new interface driver uvcvideo
[   48.172912] USB Video Class driver (v0.1.0)
[   50.286076] lp: driver loaded but no devices found
[   50.324765] NET: Registered protocol family 17
[   50.644073] ATL2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   50.945295] EXT3 FS on loop0, internal journal
[   56.941021] NET: Registered protocol family 10
[   56.941308] lo: Disabled Privacy Extensions
[   63.623393] Adding 976552k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:976552k
[   64.105513] ip_tables: (C) 2000-2006 Netfilter Core Team
[   64.556983] No dock devices found.
[   64.892712] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFB) is beyond end of object [20070126]
[   64.892735] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PSS] (Node f7ffa1e0), AE_AML_PACKAGE_LIMIT
[   64.892783] ACPI Exception (processor_perflib-0234): AE_AML_PACKAGE_LIMIT, Evaluating _PSS [20070126]
[   64.892965] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFB) is beyond end of object [20070126]
[   64.892981] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PSS] (Node f7c4ecf0), AE_AML_PACKAGE_LIMIT
[   64.893023] ACPI Exception (processor_perflib-0234): AE_AML_PACKAGE_LIMIT, Evaluating _PSS [20070126]
[   65.576907] apm: BIOS not found.
[   65.745485] ppdev: user-space parallel port driver
[   65.967930] audit(1226631508.873:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5338 profile="/usr/sbin/cupsd" namespace="default"
[   66.901550] audit(1226631509.809:3): type=1503 operation="inode_permission" requested_mask="::rw" denied_mask="::rw" name="/dev/tty" pid=5519 profile="/usr/sbin/cupsd" namespace="default"
[   67.183957] eth0: no IPv6 routers present
[   68.665968] Bluetooth: L2CAP ver 2.9
[   68.665975] Bluetooth: L2CAP socket layer initialized
[   68.804072] Bluetooth: RFCOMM socket layer initialized
[   68.804097] Bluetooth: RFCOMM TTY layer initialized
[   68.804099] Bluetooth: RFCOMM ver 1.8
[   78.991555] hda-intel: Invalid position buffer, using LPIB read method instead.
[   95.988985] CPU0 attaching NULL sched-domain.
[   95.988996] CPU1 attaching NULL sched-domain.
[   96.013048] CPU0 attaching sched-domain:
[   96.013056]  domain 0: span 03
[   96.013058]   groups: 01 02
[   96.013061] CPU1 attaching sched-domain:
[   96.013063]  domain 0: span 03
[   96.013065]   groups: 02 01
[  188.787467] usb 4-2: new full speed USB device using ohci_hcd and address 2
[  189.008291] usb 4-2: configuration #1 chosen from 1 choice
[  189.221843] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x262B
[  189.222200] usbcore: registered new interface driver usblp
[  474.281857] CPU0 attaching NULL sched-domain.
[  474.281869] CPU1 attaching NULL sched-domain.
[  474.309215] CPU0 attaching sched-domain:
[  474.309223]  domain 0: span 03
[  474.309225]   groups: 01 02
[  474.309228]   domain 1: span 03
[  474.309229]    groups: 03
[  474.309231] CPU1 attaching sched-domain:
[  474.309233]  domain 0: span 03
[  474.309235]   groups: 02 01
[  474.309237]   domain 1: span 03
[  474.309239]    groups: 03
[  474.532736] usb 4-2: USB disconnect, address 2
[  474.532981] usblp0: nonzero read bulk status received: -62
[  474.532993] usblp0: nonzero write bulk status received: -108
[  474.540036] usblp0: removed
[  766.268329] CPU0 attaching NULL sched-domain.
[  766.268341] CPU1 attaching NULL sched-domain.
[  766.287005] CPU0 attaching sched-domain:
[  766.287015]  domain 0: span 03
[  766.287017]   groups: 01 02
[  766.287020] CPU1 attaching sched-domain:
[  766.287021]  domain 0: span 03
[  766.287023]   groups: 02 01
[  783.141291] usb 3-2: new full speed USB device using ohci_hcd and address 2
[  783.369297] usb 3-2: configuration #1 chosen from 1 choice
[  783.374048] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x262B
